Manual: Add harddisk to HDD Caddy
Manual - Add harddisk to HDD Caddy

Step 1 - Control
Make sure you have the following items:
- Mini screwdriver;
- Tool to fasten the hard drive or SSD;
- O 2x internal screw;
- O (For a unibody MacBook HDD Caddy: 2 extra loose screws)
Don’t have one or more of these parts? Please contact us via info@notebookcaddy.nl

Step 2 – Loosen screws
- Loosen the screws on both sides as far as they can go, so that the screws on the inner side no longer protrude.

Step 3 – Removing the hard drive reinforcement tool
- Put pressure on one side of the tool to remove it from the HDD Caddy.

Step 4 – Placing the hard drive
- The hard drive can only fit in the HDD Caddy in one way. Slide the hard driven until it is firmly in place.

Step 5 – Replacing the hard drive reinforcement tool
This tool will also fit in only one way.
Press one side if the tool into the HDD Caddy and press down;
Make sure you cannot pull it up anymore.


Step 6 – Fastening the screws
Fasten the screws on both sides with the supplied screwdriver.
This was the last step. The HDD Caddy is now ready for placement in the laptop.
We use cookies and similar techniques so we can help you better and in a more personal way. With cookies, we and third parties track your internet behavior on our website. This way, we'll show you advertisements based on your interests, and you'll be able to share information via social media. If you continue using our website, we'll assume you're OK with that. Want to know more? View our cookiepage