Pros and cons
- Original faceplate / bezel
- Small screwdriver
This HDD Caddy can replace the optical dummy or drive of your Dell Latitude E6320 laptop by an hard drive or SSD. From now on you will have a second hard disk in your laptop. So no more lugging with external hard drives!
This mounting frame is made of aluminium that will ensure, in contrast to plastic HDD Caddies, for a better dissipation of heat which comes from the HDD. In addition, vibrations from the hard disk are also muted. That makes him even quieter. Don’t worry, both SATA I, SATA II and SATA III 2,5" hard disks and SSDs are supported. This all with a high speed of up to 6GB/s.
The hard disk can be firmly secured with the built-in screws. To do this you'll get a small screwdriver free of charge from us. This is the complete version of the Dell Latitude E6320 HDD Caddy. That means the bezel / faceplate is inclusive. To remove the DVD player or dummy from the laptop, you'll need ordinary tools. Usually a phillips #00 screwdriver is sufficient. For the installation no are no extra cables or adapters needed.
|Plug & Play||Yes|
|HDD Caddy material||Aluminium|
|Extra cables needed?||No extra cables needed|
|Type hard disk or SSD||2.5" HDD with SATA 22-pin interface, 2.5" SSD with SATA 22-pin interface|
|Maximum height of the hard disk||0.37 inch (9.5 mm)|
|Speed support||S-ATA I (1,5Gb/s), S-ATA II (3,0Gb/s) and S-ATA III (6,0Gb/s), S-ATA I (1.5Gb/s) and S-ATA II (3.0Gb/s) and S-ATA III (6.0Gb/s)|
|Suited for an optical drive type||Tray-load|
|Weight||± 2,5 oz|
|Warranty||2 years (Carry-in)|